Osmo LED Driver Light -17 W
Osmo LED Driver Light (17W) is a 395nm LED-UV curing lamp for use with Osmo LED Smart Oil, with a secondary front light for curing edges on tables and counters.
Wattage: 17W
Wavelength: 395nm
Available in stock
- Description
Transform your surfaces with Osmo LED Smart Oil—where innovation meets excellence.
With the Osmo 395nm LED-UV lamp or similar, pass the curing lamp over the treated area slowly at a rate of approximately 5 seconds per foot with the lamp held at a height of 4-6 inches (10-15cm) above the wood surface. Additional secondary light on the front of the unit for curing the edges of tables/counters.
- Solvent-free and 0 VOC
- Ready-to-use product, no thinning, or measuring and mixing hardeners required
- Second optional coat may be applied for a satin sheen
- Suitable for all sizes of installations
- Suitable for all wood species - including oily wood species
- 5 stars: 19 (83%)
- 4 stars: 3 (13%)
- 3 stars: 0 (0%)
- 2 stars: 1 (4%)
- 1 star: 0 (0%)
Definitely a game changer in the woodworking industry. Literally saves me days of dry times. Days saved =$$$ and KJP is my new supplier along with their top tier customer service is my go to for tools/finishing for my furniture/cabinetry needs.
Barry/ontario
Excellent product, the future of finish in woodworking
Fast efficient service
Great products, fast delivery and great service.
The Osmo Polyx-Oil provides a beautiful and durable finish on my projects, and the staff at KJP are always helpful in providing the info I need.
Had to choose between Osmo Smart Oil and Clean Armor UV Resin. Products seemed to give similar finish with quick UV cure. Chose Osmo as Clean Armor almost twice the cost.
KJP contacted to ship to BC as dealer in Kelowna does not carry and dealer in Calgary was out of the 750 ml. KJP shipping was very fair and relatively quick. Very easy to deal with.
Tested the product on a small kitchen table. 80% of the time was prepping with 20% being finishing. 3 coats in one evening was no problem ending with a hard satin/semi gloss finish. UV curing light had been purchased on Aliexpress for $120. They call it a 600 watt but think output is 60 watt and had no problems curing the oil taking my time passing light 4 - 6 inches over surface. Have worked with regular Osmo before and application is much the same with the oil. I do not
find easy as it is relatively thick and requires a bit of effort to get an even 'thin" coat as recommended particularly the first coat as the applicator 'drags& until after the oil is aborbed into the grain. Subsequent costs are easier but still require some effort.
Overall pleased with the result. One concern with Osmo is the shelf life which is reported to be 6 months once opened. I am getting ready to do a larger for table top which should use up the can so shelf life shouldn't be a worry.
I used this on a large coffee table I built. Works great! Table turned out beautiful.
Full discloser, I am the world's worst lacquer and paint finisher. That being said the Osmo UV-Protection Oil is outstanding as far as application goes. Used a micro-fiber roller and foam brush for application and it went on great with minimal runs and zero streaking. As far as wood color integrity it has been excellent. Hard maple did not yellow out like some protectants tend to do and Brazilian walnut had a nice dark natural color to it. Time will tell on durability but 2 coats on an Adirondack chair seems to do the trick. It is expensive but if the chair survives the summer I will be purchasing a gallon next time around.
Some boards are damaged and they refused to change them. So sad and will avoid buying here.
Hi Mark,
In this particular case you were contacted both by Karen and Natalie to sort this matter out. We were still waiting on measurements and answers from you so we could help. Hopefully we can line up on something else in the future.
Thank you
Perfect easy to apply
Osmo 2K Wood Oil
Have used this on a table top before - this time on a bed frame. Easy to work with, relatively short drying time (8-10h to re-coat). Incredibly easy to apply and repair should the need arise. Satin Finish is matt but leaves a nice rich golden tone on maple (I believe the Matt would not change the original colour at all, but have not used this so cannot verify).
Osmo Polyx-Oil
Used it as a top coat for a hallway bench that had some 3/4 inch tiger wood as the seat. Nice product to work with and seems to leave a nice finish on hardwood. I would use it again for sure.
Easy to apply - results in a hard, wonderful finish and brings out the grain and beauty of the wood. A great product that I will recommend. The Polyx oil arrived well packaged and pristine!! Thanks
Will definitely order from here again, it came fast and well packed.
This stuff is pretty great. Dead easy to apply, won’t kill too many brain cells with fumes, and rock hard finish in two days. I’ve only used the clear Matt and gloss, not any of the colours. It’s a very natural finish that highlights natural
Grain and colour. Good stuff.
Love the product! So easy to use and gives a nice sheen. First attemp my cat walked on my project and i fixed it right away. Easy too! So yes! I love it. Deffinately my new go to!
product worked very well. cant wait to use it on my next project. Definitely recommend it
This product is fantastic. It applies easily, dries to a nice smooth finish that is hard, durable and brilliant. Highly recommended
First, I'm really satisfied with the delivery process. I ordered the product on a Wednesday night, and I received it on the Friday morning. I haven't put to test the product that much, but it seems much more efficient as far as making my counter waterproof and stain proof than the regular oil for butcher block I used previously (bamboo countertop). It seems I won't be watching my countertop for stain or marks every 5 seconds, and it seems it's gonna be much easier to clean. So, very happy so far!
Easy to apply and gives a nice finish
I used it on walnut, which I regret. Works great on maple!

