Osmo Polyx-Oil
Osmo Polyx-Oil is a hardwax-oil finish made from natural vegetable oils and waxes, applied by brush or roller with no buffing needed. Resistant to water, dirt, and everyday spills, it never needs full sanding and refinishing again.
125mL: covers ~32 ft²
750mL: covers ~194 ft²
2.5L: covers ~645 ft²
Dry time: 8-10 hrs, 2 coats recommended
Available in stock
- Description
- Coverage
- Application Instructions
The easiest application yet!
Osmo Polyx-Oil is a general purpose Hardwax-Oil wood finish that is derived from natural vegetable oils and waxes. Resistant to water, dirt, beer, wine, cola and saliva, Osmo Polyx-Oil is microporous and molecularly bonds with the wood, meaning it does not crack, flake, peel or blister. Our new advanced formula of Polyx-Oil has been specially engineered in Germany to be the first Hardwax-Oil available on the North American market that can be easily applied with a brush or roller, with no buffing necessary! Can be spot-repaired and/or restored/renewed with no sanding required, therefore wood never needs complete sanding and refinishing again.
- Easy to apply – used by both professionals and homeowners
- Extremely durable and hardwearing
- Can be spot-repaired and refreshed with no sanding required
- Microporous finish which does not crack, peel or flake
- Very water and dirt resistant as well as juice, tea, cola, wine, beer, coffee.
- Enhances the wood’s natural character
- Saliva-resistant and sweatproof, suitable for children’s toys
Coverage
Approx. Coverage 24m²/L (258 ft2/L) with one coat
Approx. Dry Time 8-10 hrs
Number of Coats 2 coats
BY HAND WITH FLEECE APPLICATOR PADS
- Apply two thin coats with our fleece applicator pads (best way to ensure you avoid over-application).
- Stir the Polyx®-Oil well and pour into tray
- Work the product into the wood thinly and evenly in figure 8 or circular motions using the fleece applicator pad
- Be sure to thinly and evenly coat the surface and leave on the surface for approx. 5 minutes
- Allow approx. 8-10 hours drying time. Allow for good ventilation whilst drying
- Apply second coat following previous steps.
BY HAND WITH A CLOTH/RAG
Apply three thin coats with a lint-free microfibre cloth. ie. Osmo Easy Pads.
- Stir the Polyx®-Oil well and prior to use
- Work product into wood using cloth in a circular or figure 8 pattern
- Allow roughly 15-minutes for oils to penetrate
- Working with the grain, remove all excess product from surface
- Allow 8-10 hours drying time prior to recoating
- Apply second and third coats following previous steps
- WARNING: Cloths saturated with product are a spontaneous combustion hazard and should be left out unfolded until dried, prior to disposal or preferably stored in a proper fireproof container
BY HAND WITH SCOTCHBRITE PADS
Apply two thin coats with non-abrasive white scotchbrite pads
- Stir the Polyx®-Oil well and pour into tray
- Work the product into the wood thinly and evenly in figure 8 or circular motions using a white pad
- Be sure to thinly and evenly coat the surface and leave on the surface for approx. 5 minutes
- With a clean white pad, polish the surface ensuring no swirl marks, rings, or wipe marks
- Ensure all excess product is removed from surface
- Allow approx. 8-10 hours drying time. Allow for good ventilation whilst drying
- Apply second coat following previous steps.
- 5 stars: 19 (83%)
- 4 stars: 3 (13%)
- 3 stars: 0 (0%)
- 2 stars: 1 (4%)
- 1 star: 0 (0%)
Definitely a game changer in the woodworking industry. Literally saves me days of dry times. Days saved =$$$ and KJP is my new supplier along with their top tier customer service is my go to for tools/finishing for my furniture/cabinetry needs.
Barry/ontario
Excellent product, the future of finish in woodworking
Fast efficient service
Great products, fast delivery and great service.
The Osmo Polyx-Oil provides a beautiful and durable finish on my projects, and the staff at KJP are always helpful in providing the info I need.
Had to choose between Osmo Smart Oil and Clean Armor UV Resin. Products seemed to give similar finish with quick UV cure. Chose Osmo as Clean Armor almost twice the cost.
KJP contacted to ship to BC as dealer in Kelowna does not carry and dealer in Calgary was out of the 750 ml. KJP shipping was very fair and relatively quick. Very easy to deal with.
Tested the product on a small kitchen table. 80% of the time was prepping with 20% being finishing. 3 coats in one evening was no problem ending with a hard satin/semi gloss finish. UV curing light had been purchased on Aliexpress for $120. They call it a 600 watt but think output is 60 watt and had no problems curing the oil taking my time passing light 4 - 6 inches over surface. Have worked with regular Osmo before and application is much the same with the oil. I do not
find easy as it is relatively thick and requires a bit of effort to get an even 'thin" coat as recommended particularly the first coat as the applicator 'drags& until after the oil is aborbed into the grain. Subsequent costs are easier but still require some effort.
Overall pleased with the result. One concern with Osmo is the shelf life which is reported to be 6 months once opened. I am getting ready to do a larger for table top which should use up the can so shelf life shouldn't be a worry.
I used this on a large coffee table I built. Works great! Table turned out beautiful.
Full discloser, I am the world's worst lacquer and paint finisher. That being said the Osmo UV-Protection Oil is outstanding as far as application goes. Used a micro-fiber roller and foam brush for application and it went on great with minimal runs and zero streaking. As far as wood color integrity it has been excellent. Hard maple did not yellow out like some protectants tend to do and Brazilian walnut had a nice dark natural color to it. Time will tell on durability but 2 coats on an Adirondack chair seems to do the trick. It is expensive but if the chair survives the summer I will be purchasing a gallon next time around.
Some boards are damaged and they refused to change them. So sad and will avoid buying here.
Hi Mark,
In this particular case you were contacted both by Karen and Natalie to sort this matter out. We were still waiting on measurements and answers from you so we could help. Hopefully we can line up on something else in the future.
Thank you
Perfect easy to apply
Osmo 2K Wood Oil
Have used this on a table top before - this time on a bed frame. Easy to work with, relatively short drying time (8-10h to re-coat). Incredibly easy to apply and repair should the need arise. Satin Finish is matt but leaves a nice rich golden tone on maple (I believe the Matt would not change the original colour at all, but have not used this so cannot verify).
Osmo Polyx-Oil
Used it as a top coat for a hallway bench that had some 3/4 inch tiger wood as the seat. Nice product to work with and seems to leave a nice finish on hardwood. I would use it again for sure.
Easy to apply - results in a hard, wonderful finish and brings out the grain and beauty of the wood. A great product that I will recommend. The Polyx oil arrived well packaged and pristine!! Thanks
Will definitely order from here again, it came fast and well packed.
This stuff is pretty great. Dead easy to apply, won’t kill too many brain cells with fumes, and rock hard finish in two days. I’ve only used the clear Matt and gloss, not any of the colours. It’s a very natural finish that highlights natural
Grain and colour. Good stuff.
Love the product! So easy to use and gives a nice sheen. First attemp my cat walked on my project and i fixed it right away. Easy too! So yes! I love it. Deffinately my new go to!
product worked very well. cant wait to use it on my next project. Definitely recommend it
This product is fantastic. It applies easily, dries to a nice smooth finish that is hard, durable and brilliant. Highly recommended
First, I'm really satisfied with the delivery process. I ordered the product on a Wednesday night, and I received it on the Friday morning. I haven't put to test the product that much, but it seems much more efficient as far as making my counter waterproof and stain proof than the regular oil for butcher block I used previously (bamboo countertop). It seems I won't be watching my countertop for stain or marks every 5 seconds, and it seems it's gonna be much easier to clean. So, very happy so far!
Easy to apply and gives a nice finish
I used it on walnut, which I regret. Works great on maple!