Amana - RC-2250 - 1-1/2" Mini Insert Flattening/Spoilboard
Amana - RC-2250 - 1-1/2" Mini Insert Flattening/Spoilboard
Amana - RC-2250 - 1-1/2" Mini Insert Flattening/Spoilboard
Amana - RC-2250 - 1-1/2" Mini Insert Flattening/Spoilboard

Amana - RC-2250 - 1-1/2" Mini Insert Flattening/Spoilboard

$418.95

Available in stock

Description

RC-2250 - Mini Insert Spoilboard (Surfacing & Rabbeting with Scorer)

  • Shank (d): 1/2"
  • Diameter (D): 1-1/2"
  • Cutting Height (B): 1/2"
  • Overall Length (L): 2-5/16"
  • Max RPM: 24,000
  • Replacement Knives: HMA-12, HCK-70
  • Type: Insert solid carbide

Mini insert carbide spoilboard surfacing & rabbeting with scorer, great for cutting tight corners. Features unique 2+2 insert knife design that contains two cutting flutes and two up-shear scorers, which provide a smoother finish at the bottom of the cut than traditional two-knife style router bits. Great for surface planing.

Also suitable for router sled machines, Make sure that your router sled is fully stable and squared.

Perfect for
  • Resurfacing spoilboards using CNC
  • 2+2 spoilboards contain two bottom scorers for better performance, finer surface finish and better clearance for 90º corners.
  • Planing large glued up panels using CNC
  • Surfacing and finishing wood using timber slab machines
  • Rabbeting or slotting

Designed for planing & rabbeting the following materials
  • MDF
  • Fiberboard
  • HDF/LDF
  • Balsa Core*
  • Epoxy (Epoxy Resins)*
  • High Density Urethane (HDU Board)*
  • Plastic/Acrylic**
  • Plywood/Chipboard*
  • Hardwood/Softwood*
  • Ultra-High-Molecular-Weight Polyethylene (UHMWPE)*

*For optimal results and maximum insert life, replace inserts with optional general purpose knives #AMA-12 and #RCK-70 (sold separately).

**Use lower CNC spindle RPM and adjusted feed-rate to prevent Melting and adhesion of the acrylic material to the tool.

Featuring
  • 2+2 design
  • 4-sided solid carbide insert knives
  • Exclusive carbide grade for highest quality of cut
  • Maximum cutting efficiency
  • Faster material removal process

These industrial router bits feature solid carbide insert knives with four cutting edges that allow users to rotate the knife when one side becomes dull providing the highest-quality finish available on woodworking tools.

Recommendations: For surfacing solid woods it is recommended to remove both bottom scorers.

Proper torques rating to tighten down screws is 2-3Nm Torques.
Speed and Feed Rate

CNC running parameters based on 1 x Diameter depth per pass:

  • RPM: 18,000
  • Feed Rate: 240 IPM
  • Chip Load per tooth: 0.007"
  • Ramp down Rate: 120 IPM
  • 5 stars: 14 (88%)
  • 4 stars: 2 (13%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
This product has no reviews of its own. The merchant grouped it with related products, so the reviews shown are from across that group.
M
MDavis
Faulty bit and awful customer service from KJP

Had an issue with one of the two I purchased. Contacted Amana who told me to get a RMA from KJP. My initial contact was ignored (no response then a confirmation I was being ignored when someone accidentally replied all instead of sending a bcc) Then I was offered the opportunity to return the bit via post at my expense (don't live in Ottawa no mo') provided it had not been used. In my original email I said I got home and used it. The issue was it marred the work and the only way one could see that is if ya used the bit.

Turns out there was a problem the bit was defective and Amana took care of me without any assistance from KJP.

Was a gross interaction and I don't know why Andrew was such a meanie Richard head from the jump.

Really good bit. The pilot drill broke pretty early on. Seems to be a somewhat common issue. So I happened to be back in Ottawa and decided to pop in to KJP. Ran in to Andrew, who had no idea who I was, and asked about buying a replacement pilot drill. He was rude af and told me they don't stock the drill but I could go online and order it tho...

That was very helpful because I wasn't aware you can buy stuff on the internet.

C
Cindy D.
Great

Came in on time and in great condition

B
Bob S.
Amana spiral compression bit

Excellent bit with Spectra finish, very clean cutting leaving very clean top and bottom edges on Baltic Birch plywood

D
Don G.
Bowl and gray bits

Look good. Haven't used them yet. Looking forward to it.

D
Doug J.
Great blade

Chews through wood and leaves a very smooth surface. And it's a good price!

R
Robert M.
Excellent Bit!

I bought this to use with the Shaper Origin Pro for some engraving. It does a nice job.

H
Henry V.
Amana blades

Great blade. Best bang for your buck!

D
Dale S.
Love it!

Great blade, rips thru like butter!

G
Gary V.P.

Long lasting and accurate👍

H
Henry V.
Amana

Excellent quality blade!

f
francis
Does the job!

Does a good job, but since I am working with a very hard wood, (acacia), i had to have it sharpened halfway through the job.

C
Chris B.
Incredible

KJP rocked my order. They gave me a quote super fast to custom size a small piece of curly hard maple. I ordered the board and an Amana 1 1/8" bit for surfacing. The Amana bit works fast and cuts clean. The bit cost at KJP is very economical compared to other suppliers. My two piece order came very fast.

Nice Work KJP and thanks Peter.

Cheers

Chris

D
Derrell L.
Awesome service!

Quality bits make all the difference in CNC. Amana bits are fantastic.
Glad to see that I can get them from a Canadian supplier at good prices!

Also, they didn't have this one in their selection, but they ordered it in and put it on their website!

Customer service was amazing!
Thank you!

J
Jennifer D.
Sweet bit!

Gets in tight for those small details! Happy I ordered 2 because this is my go to for 3D carving!

J
Jennifer D.
CnC Bits

Great product, easy ordering, fast delivery! Thanks KJP!

J
Jennifer D.
CnC bits

Easy to order, fast delivery and excellent quality! Thanks so much KJP!

Description

RC-2250 - Mini Insert Spoilboard (Surfacing & Rabbeting with Scorer)

  • Shank (d): 1/2"
  • Diameter (D): 1-1/2"
  • Cutting Height (B): 1/2"
  • Overall Length (L): 2-5/16"
  • Max RPM: 24,000
  • Replacement Knives: HMA-12, HCK-70
  • Type: Insert solid carbide

Mini insert carbide spoilboard surfacing & rabbeting with scorer, great for cutting tight corners. Features unique 2+2 insert knife design that contains two cutting flutes and two up-shear scorers, which provide a smoother finish at the bottom of the cut than traditional two-knife style router bits. Great for surface planing.

Also suitable for router sled machines, Make sure that your router sled is fully stable and squared.

Perfect for
  • Resurfacing spoilboards using CNC
  • 2+2 spoilboards contain two bottom scorers for better performance, finer surface finish and better clearance for 90º corners.
  • Planing large glued up panels using CNC
  • Surfacing and finishing wood using timber slab machines
  • Rabbeting or slotting

Designed for planing & rabbeting the following materials
  • MDF
  • Fiberboard
  • HDF/LDF
  • Balsa Core*
  • Epoxy (Epoxy Resins)*
  • High Density Urethane (HDU Board)*
  • Plastic/Acrylic**
  • Plywood/Chipboard*
  • Hardwood/Softwood*
  • Ultra-High-Molecular-Weight Polyethylene (UHMWPE)*

*For optimal results and maximum insert life, replace inserts with optional general purpose knives #AMA-12 and #RCK-70 (sold separately).

**Use lower CNC spindle RPM and adjusted feed-rate to prevent Melting and adhesion of the acrylic material to the tool.

Featuring
  • 2+2 design
  • 4-sided solid carbide insert knives
  • Exclusive carbide grade for highest quality of cut
  • Maximum cutting efficiency
  • Faster material removal process

These industrial router bits feature solid carbide insert knives with four cutting edges that allow users to rotate the knife when one side becomes dull providing the highest-quality finish available on woodworking tools.

Recommendations: For surfacing solid woods it is recommended to remove both bottom scorers.

Proper torques rating to tighten down screws is 2-3Nm Torques.
Speed and Feed Rate

CNC running parameters based on 1 x Diameter depth per pass:

  • RPM: 18,000
  • Feed Rate: 240 IPM
  • Chip Load per tooth: 0.007"
  • Ramp down Rate: 120 IPM