S4S Ontario! Lumber Mix Pack
En ligne / Précommande

S4S Ontario! Mélange de bois d'œuvre

$95.95
$79.95
Frais de livraison calculés à l’étape du paiement.
Épaisseur: 12,7 mm
Largeur: 4-3/4 po
Longueur: 24 po.

En stock

Description

Un excellent exemple des types de bois d'œuvre de l'Ontario !

Ce pack vous donnera un échantillon de 6 des essences de bois franc les plus populaires de l'Ontario, que l'on trouve dans nos forêts. Vous ne pouvez pas vous tromper avec ces types de bois franc : Frêne, Cerisier, Érable, Chêne rouge, Chêne blanc et Noyer noir !

Nous vous fournirons une planche de 4-3/4" de large, de haute qualité, rabotée (S4S) en Noyer noir (x1), Cerisier (x1), Érable dur (x1), Chêne rouge (x1), Frêne blanc (x1) et Chêne blanc (x1) dans l'épaisseur et la longueur de votre choix.

Si vous souhaitez effectuer le fraisage vous-même, essayez notre Pack Mix de bois d'œuvre brut 4/4 Ontario! pour une version plus économique.

Spécifications

À quoi pouvez-vous vous attendre ?

Nous sélectionnerons soigneusement une planche de haute qualité de chaque type de bois pour vous. Nous prêtons une attention particulière aux caractéristiques des essences de bois afin de vous envoyer une planche qui représente bien chaque type de bois.

  • 1/2" ou 3/4" d'épaisseur
  • 4-3/4" de large
  • 24" ou 47" de long

Afin d'offrir un emballage plus protecteur pour l'expédition, nos longueurs sont souvent 1/4" inférieures aux tailles indiquées. Besoin d'une longueur plus importante ? Veuillez nous envoyer un courriel pour un devis.

What does S4S mean?

S4S Lumber

Who are they for? These are ideal for those who aren’t equipped with the necessary tools to flatten and straighten boards.

The term "surfaced" or "dressed" refers to a piece of wood that has been milled. To achieve the necessary dimensions, we select a larger board to work from. Both faces and edges are then surfaced so you can be assured that the board is flat and straight. These boards are available in specific sizes.

For example: 3/4” x 5-1/4” x 24”

Rough Cut Lumber

Who are they for? These are ideal for those who enjoy working with machinery or hand tools to mill their own boards.

We use this term to describe boards that require additional milling. Rough cut lumber have been run through the planer to show the grain however they have not been dressed. You will need to mill both faces and edges. Rough cut lumber are available in specific lengths with varying widths.

For example: 4/4 x (5-6”) x 24”

You will receive a board that is just shy of an inch thick, with a width in the range of 5-6”, and is 24” long.

Rough Cut Lumber vs S4S Lumber
  • 5 stars: 19 (90%)
  • 4 stars: 2 (10%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
Some of the reviews shown are from related products the merchant grouped with this one.
A
Andrew F.
Amazing quality!

Amazing quality! Great wood species! KJP is amazing! Can’t say it enough! Will be order wood here more often!

B
Beattie S.
Excellent

Exactly as advertised thanks again

C
Chica'smom
The best!

Easy ordering, fast delivery, great quality and ready for my list of projects!

D
DAVE S.

4/4 Ontario! Lumber Mix Pack

K
Keith L.
Thin packs are the best

I enjoy laminating with the Thin packs to create design when turning.

Keith

B
Bryan W.
Always a pleasure

I've been ordering here for a couple of years now and I'm never disappointed. Best selection and best prices anywhere.

C
Courtney R.
Perfect

These thin pieces are perfect for art and creating something that doesn’t weigh too much! Love this product!!

H
Harvey G.

Haven't got it yet

D
Douglas N.

Prompt shipping. Well packaged. Happy customer!

M
Mikey U.
110% Customer Service

Made an order, got a call that one of the speices was out of stock. They offered a refund/replace it with something else, I chose to have it replaced and told them to surprise me with the replacement. Well I was surprised... pleasantly too. Thank you for your excellent customer service.

C
Carson D.
O Canada thins

The wood I received was absolutely awesome, there were no flaws or defects what so ever. I will definitely be buying from your company again. Can’t say enough how great the product is tho. Thank you

B
Brian M.
4/4 rough cut Ontario pack

Once again you guys have delivered a top quality product in a very timely fashion. I could not be more pleased with the product if I get from you guys nor the service. Thank you

C
CARRIE C.
Nice wood

I am really happy with the selection of wood as I am using them for smoking drink glasses, was a little disapointed I did question if they were all untreated and food safe and some came with marking paint on them which I will not be able to use; but over all great product. TY

L
Larry M.
Lumber

Excellent wood. The Ambrosia maple was perfect.

J
Jonathan B.
A great purchase

Bought this pack for a few small projects I had in mind. The wood was great, no twisting. Boards were true and shipping was fast. I will be buying from kjp select many more times in the future.
I also bought the 1/4" zoo pack and the same applies to those boards as well. Definitely not disappointed in these purchases.

G
Gillian P.
A little bit of everything

I couldn’t be happier with the Ontario lumber mix pack. It’s perfect for the project I’m working on. What’s even better is how quickly it got here. I definitely will be shopping with KJP again!

S
Stephen K.
Good value

Good selection of boards for projects. Most need only a bit of sanding or scraping to bring to a nice finish. Would definitely buy these packs again!

J
Jesse J.
Excellent products

I bought this and an exotic offcut cutting board pack. Both kits are dressed perfectly and free of defects. The only issue i have is the ash and white oak are hard for me to tell apart as the grain patterns are nearly identical. I beleive oak is the darker of the 2. Everything was stacked neatly in the box and packed tightly so nothing was dented in transport.
Thanks for offering these kits for wood workers like me who dont have a jointer!

M
Marc C.
3/4 Ontario mix pack

Great boards. Exactly what I expected and friendly in store service.

C
Christian B.
Great pack

Lovely and colorful little pack for small projects.. Well dressed. Thank you!

H
Harry P.
We didn’t get wood from kJP Hardwood

We didn’t get kjp hardwood yet

Description

Un excellent exemple des types de bois d'œuvre de l'Ontario !

Ce pack vous donnera un échantillon de 6 des essences de bois franc les plus populaires de l'Ontario, que l'on trouve dans nos forêts. Vous ne pouvez pas vous tromper avec ces types de bois franc : Frêne, Cerisier, Érable, Chêne rouge, Chêne blanc et Noyer noir !

Nous vous fournirons une planche de 4-3/4" de large, de haute qualité, rabotée (S4S) en Noyer noir (x1), Cerisier (x1), Érable dur (x1), Chêne rouge (x1), Frêne blanc (x1) et Chêne blanc (x1) dans l'épaisseur et la longueur de votre choix.

Si vous souhaitez effectuer le fraisage vous-même, essayez notre Pack Mix de bois d'œuvre brut 4/4 Ontario! pour une version plus économique.

Spécifications

À quoi pouvez-vous vous attendre ?

Nous sélectionnerons soigneusement une planche de haute qualité de chaque type de bois pour vous. Nous prêtons une attention particulière aux caractéristiques des essences de bois afin de vous envoyer une planche qui représente bien chaque type de bois.

  • 1/2" ou 3/4" d'épaisseur
  • 4-3/4" de large
  • 24" ou 47" de long

Afin d'offrir un emballage plus protecteur pour l'expédition, nos longueurs sont souvent 1/4" inférieures aux tailles indiquées. Besoin d'une longueur plus importante ? Veuillez nous envoyer un courriel pour un devis.

What does S4S mean?

S4S Lumber

Who are they for? These are ideal for those who aren’t equipped with the necessary tools to flatten and straighten boards.

The term "surfaced" or "dressed" refers to a piece of wood that has been milled. To achieve the necessary dimensions, we select a larger board to work from. Both faces and edges are then surfaced so you can be assured that the board is flat and straight. These boards are available in specific sizes.

For example: 3/4” x 5-1/4” x 24”

Rough Cut Lumber

Who are they for? These are ideal for those who enjoy working with machinery or hand tools to mill their own boards.

We use this term to describe boards that require additional milling. Rough cut lumber have been run through the planer to show the grain however they have not been dressed. You will need to mill both faces and edges. Rough cut lumber are available in specific lengths with varying widths.

For example: 4/4 x (5-6”) x 24”

You will receive a board that is just shy of an inch thick, with a width in the range of 5-6”, and is 24” long.

Rough Cut Lumber vs S4S Lumber