Amana - RC-1148 - Rainure en V à 60° avec plaquette
En stock
- Description
- Excellent pour la sculpture
- Vitesse et avance
- Avantages des outils à plaquettes
RC-1148 - Rainure en V à 60° avec plaquette (Plaquette en carbure monobloc)
- Queue (d) : 1/4"
- Diamètre (D) : 1-1/16"
- Angle (a°) : 60°
- Hauteur de coupe (B) : 59/64"
- Longueur hors tout (L) : 2-25/64"
- a1° : 30°
- B1 : 1-1/16"
- Arêtes de coupe : 1
- RPM max. : 24 000
- L1 : 1-1/8"
- Denture : 1
- Nombre de couteaux : 1
- Couteau de rechange : RCK-56
La conception innovante de l'outil CNC utilise le couteau à plaquette en carbure de la plus haute qualité. Ces fraises à rainurer en V industrielles à plaquettes ont été spécialement conçues pour des applications telles que :
- Plis onglets - "créez le joint parfait"
- Signalétique et lettrage
- Aluminium, Laiton, Bronze, Cuivre, Or, Argent & Fibre de Carbone (gravure uniquement)
- Acrylique/Plastique
- Composites
- Terrasses composites
- Époxy (Résines époxy)
- Mousse
- Polyéthylène Haute Densité (PEHD)
- Stratifié
- Mélaminé
- MDF/HDF
- PVC
- Panneau de signalisation
- Surface solide
- Contreplaqué plaqué
- Bois
- Panneau Xanita®*
- Uréthane haute densité 20lbs
*Lorsque vous travaillez avec le panneau Xanita LightBoard (X-board® X-board® plus), nous recommandons d'utiliser des couteaux MDF pour de meilleurs résultats.
Paramètres de fonctionnement CNC basés sur une profondeur de passe de 1 x diamètre :
- RPM : 18 000
- Vitesse d'avance : 40 IPM
- Charge de copeaux par dent : 0,002"
- Vitesse de descente : 40 IPM
- Les couteaux à plaquettes longue durée offrent des coupes d'une qualité supérieure et toujours lisses
- Remplacement rapide et précis des couteaux émoussés
- Grâce à la précision des plaquettes, la durée de vie de l'outil est prolongée
- L'outillage à plaquettes permet d'utiliser des nuances de carbure plus dures
- Nuances de carbure spéciales pour applications spéciales
- Solution rentable par rapport au remplacement des fraises à défoncer brasées
Le système de vis de blocage sécurisé garantit une sécurité maximale et maintient la précision de coupe. Les défonceuses CNC nécessitent des systèmes de maintien de qualité pour réduire au minimum les risques de déplacement du matériau pendant l'opération.
Attention : Avant d'utiliser un outil à plaquettes, assurez-vous que la vis de réglage est fermement serrée. Lors du remplacement d'une plaquette émoussée, nettoyez d'abord l'outil et retirez toute la poussière avant d'insérer le nouveau couteau.
- 5 stars: 14 (88%)
- 4 stars: 2 (13%)
- 3 stars: 0 (0%)
- 2 stars: 0 (0%)
- 1 star: 0 (0%)
Had an issue with one of the two I purchased. Contacted Amana who told me to get a RMA from KJP. My initial contact was ignored (no response then a confirmation I was being ignored when someone accidentally replied all instead of sending a bcc) Then I was offered the opportunity to return the bit via post at my expense (don't live in Ottawa no mo') provided it had not been used. In my original email I said I got home and used it. The issue was it marred the work and the only way one could see that is if ya used the bit.
Turns out there was a problem the bit was defective and Amana took care of me without any assistance from KJP.
Was a gross interaction and I don't know why Andrew was such a meanie Richard head from the jump.
Really good bit. The pilot drill broke pretty early on. Seems to be a somewhat common issue. So I happened to be back in Ottawa and decided to pop in to KJP. Ran in to Andrew, who had no idea who I was, and asked about buying a replacement pilot drill. He was rude af and told me they don't stock the drill but I could go online and order it tho...
That was very helpful because I wasn't aware you can buy stuff on the internet.
Came in on time and in great condition
Excellent bit with Spectra finish, very clean cutting leaving very clean top and bottom edges on Baltic Birch plywood
Look good. Haven't used them yet. Looking forward to it.
Chews through wood and leaves a very smooth surface. And it's a good price!
I bought this to use with the Shaper Origin Pro for some engraving. It does a nice job.
Great blade. Best bang for your buck!
Great blade, rips thru like butter!
Long lasting and accurate👍
Excellent quality blade!
Does a good job, but since I am working with a very hard wood, (acacia), i had to have it sharpened halfway through the job.
KJP rocked my order. They gave me a quote super fast to custom size a small piece of curly hard maple. I ordered the board and an Amana 1 1/8" bit for surfacing. The Amana bit works fast and cuts clean. The bit cost at KJP is very economical compared to other suppliers. My two piece order came very fast.
Nice Work KJP and thanks Peter.
Cheers
Chris
Quality bits make all the difference in CNC. Amana bits are fantastic.
Glad to see that I can get them from a Canadian supplier at good prices!
Also, they didn't have this one in their selection, but they ordered it in and put it on their website!
Customer service was amazing!
Thank you!
Gets in tight for those small details! Happy I ordered 2 because this is my go to for 3D carving!
Great product, easy ordering, fast delivery! Thanks KJP!
Easy to order, fast delivery and excellent quality! Thanks so much KJP!