Huile pour terrasses Osmo
L'Huile pour terrasses Osmo est une finition naturelle à base d'huile pour les terrasses extérieures, résistante aux intempéries et à l'eau, tout en préservant l'aspect naturel du bois. Transparente, sans protection UV.
750 ml: couvre environ 18 m²
2,5 L: couvre environ 60 m²
Temps de séchage: 12 heures, 2 couches recommandées
En stock
- Description
- Couverture
- Instructions d'application
Répondre aux exigences des terrasses canadiennes!
Fini protecteur à base d'huile naturelle pour le bois extérieur qui ne s'écaille pas, ne craque pas, ne pèle pas et ne cloque pas. Fini microporeux et respirant permettant au bois de respirer et réduisant le risque de gonflement et de rétrécissement. Hydrofuge et résistant aux intempéries extrêmes. Facile à appliquer et à renouveler, sans ponçage ni apprêt nécessaire. Une fois sec, le fini est sans danger pour les humains, les animaux et les plantes et convient aux jouets pour enfants selon la norme EN 71.3 (norme européenne).
- Colore efficacement les bois traités sous pression et non traités
- Le caractère et le grain naturels du bois restent visibles
- Fini microporeux qui ne craque pas, ne pèle pas et ne s'écaille pas
- Sans danger pour les animaux et les plantes une fois sec – naturellement!
- Très résistant à l'eau et à la saleté – l'eau perle à la surface
- Réduit le gonflement et le rétrécissement du bois
- Aucun ponçage nécessaire pour les applications futures
- Qualité allemande = Application facile avec d'excellents résultats professionnels
L'huile pour terrasses transparente Osmo 1277 est un fini transparent et n'offre donc aucune protection UV.
Couverture
- Couverture approximative - 24m²/L (258 pi²/L) en une couche
- Temps de séchage approximatif - 12 heures
- Nombre de couches - 2 couches
PRÉPARATION
- La surface du bois doit être propre, sèche et sans gel (teneur maximale en humidité 20 %)
- Nettoyez soigneusement les anciens finis microporeux. Retirez les anciens vernis.
- Veuillez ne pas poncer les surfaces même plus fines que P 120. Portez toujours un masque anti-poussière lors du ponçage.
MODE D'EMPLOI
- Utilisez une brosse de qualité rigide (brosse Osmo) ou un chiffon non pelucheux (par exemple pour les meubles) et appliquez finement et uniformément dans le sens du grain du bois sur la surface propre et sèche.
- Pour une application rapide et facile, nous recommandons d'utiliser la brosse à plancher Osmo de 150 mm spécialement conçue, qui vous permet d'appliquer le fini debout.
- Appliquer finement et uniformément. Laissez bien ventiler pendant le séchage. Appliquez ensuite finement et uniformément la 2ème couche une fois que la 1ère couche est complètement sèche.
L'huile pour terrasses transparente Osmo 1277 est un fini transparent et n'offre donc aucune protection UV.
- 5 stars: 19 (83%)
- 4 stars: 3 (13%)
- 3 stars: 0 (0%)
- 2 stars: 1 (4%)
- 1 star: 0 (0%)
Definitely a game changer in the woodworking industry. Literally saves me days of dry times. Days saved =$$$ and KJP is my new supplier along with their top tier customer service is my go to for tools/finishing for my furniture/cabinetry needs.
Barry/ontario
Excellent product, the future of finish in woodworking
Fast efficient service
Great products, fast delivery and great service.
The Osmo Polyx-Oil provides a beautiful and durable finish on my projects, and the staff at KJP are always helpful in providing the info I need.
Had to choose between Osmo Smart Oil and Clean Armor UV Resin. Products seemed to give similar finish with quick UV cure. Chose Osmo as Clean Armor almost twice the cost.
KJP contacted to ship to BC as dealer in Kelowna does not carry and dealer in Calgary was out of the 750 ml. KJP shipping was very fair and relatively quick. Very easy to deal with.
Tested the product on a small kitchen table. 80% of the time was prepping with 20% being finishing. 3 coats in one evening was no problem ending with a hard satin/semi gloss finish. UV curing light had been purchased on Aliexpress for $120. They call it a 600 watt but think output is 60 watt and had no problems curing the oil taking my time passing light 4 - 6 inches over surface. Have worked with regular Osmo before and application is much the same with the oil. I do not
find easy as it is relatively thick and requires a bit of effort to get an even 'thin" coat as recommended particularly the first coat as the applicator 'drags& until after the oil is aborbed into the grain. Subsequent costs are easier but still require some effort.
Overall pleased with the result. One concern with Osmo is the shelf life which is reported to be 6 months once opened. I am getting ready to do a larger for table top which should use up the can so shelf life shouldn't be a worry.
I used this on a large coffee table I built. Works great! Table turned out beautiful.
Full discloser, I am the world's worst lacquer and paint finisher. That being said the Osmo UV-Protection Oil is outstanding as far as application goes. Used a micro-fiber roller and foam brush for application and it went on great with minimal runs and zero streaking. As far as wood color integrity it has been excellent. Hard maple did not yellow out like some protectants tend to do and Brazilian walnut had a nice dark natural color to it. Time will tell on durability but 2 coats on an Adirondack chair seems to do the trick. It is expensive but if the chair survives the summer I will be purchasing a gallon next time around.
Some boards are damaged and they refused to change them. So sad and will avoid buying here.
Hi Mark,
In this particular case you were contacted both by Karen and Natalie to sort this matter out. We were still waiting on measurements and answers from you so we could help. Hopefully we can line up on something else in the future.
Thank you
Perfect easy to apply
Osmo 2K Wood Oil
Have used this on a table top before - this time on a bed frame. Easy to work with, relatively short drying time (8-10h to re-coat). Incredibly easy to apply and repair should the need arise. Satin Finish is matt but leaves a nice rich golden tone on maple (I believe the Matt would not change the original colour at all, but have not used this so cannot verify).
Osmo Polyx-Oil
Used it as a top coat for a hallway bench that had some 3/4 inch tiger wood as the seat. Nice product to work with and seems to leave a nice finish on hardwood. I would use it again for sure.
Easy to apply - results in a hard, wonderful finish and brings out the grain and beauty of the wood. A great product that I will recommend. The Polyx oil arrived well packaged and pristine!! Thanks
Will definitely order from here again, it came fast and well packed.
This stuff is pretty great. Dead easy to apply, won’t kill too many brain cells with fumes, and rock hard finish in two days. I’ve only used the clear Matt and gloss, not any of the colours. It’s a very natural finish that highlights natural
Grain and colour. Good stuff.
Love the product! So easy to use and gives a nice sheen. First attemp my cat walked on my project and i fixed it right away. Easy too! So yes! I love it. Deffinately my new go to!
product worked very well. cant wait to use it on my next project. Definitely recommend it
This product is fantastic. It applies easily, dries to a nice smooth finish that is hard, durable and brilliant. Highly recommended
First, I'm really satisfied with the delivery process. I ordered the product on a Wednesday night, and I received it on the Friday morning. I haven't put to test the product that much, but it seems much more efficient as far as making my counter waterproof and stain proof than the regular oil for butcher block I used previously (bamboo countertop). It seems I won't be watching my countertop for stain or marks every 5 seconds, and it seems it's gonna be much easier to clean. So, very happy so far!
Easy to apply and gives a nice finish
I used it on walnut, which I regret. Works great on maple!
