Osmo LED Smart Oil
Osmo LED Smart Oil es un aceite de cera dura industrial de una sola capa que cura instantáneamente bajo lámparas LED-UV. Libre de COV y solventes, para pisos interiores, escaleras y muebles.
Rendimiento: ~40 m²
Capas: 1 para mate, 2 para satinado
Uso profesional solamente, se requiere calificación comercial
Disponible
- Description
- Instrucciones de aplicación
Aceite-cera dura de curado instantáneo LED-UV
Osmo LED Smart Oil es el aceite-cera dura industrial de una sola capa que revoluciona su proceso de acabado con curado instantáneo LED-UV. Disponible en acabado satinado o mate, este avanzado sistema monocomponente ofrece una durabilidad excepcional y resistencia a los líquidos, y no contiene VOC, disolventes ni esferas. Se seca instantáneamente bajo lámparas LED-UV, ahorrando tiempo y dinero sin sacrificar la calidad.
Recomendado para: Para el recubrimiento industrial de superficies de madera, incluyendo suelos, escaleras, muebles y más. Solo para interiores.
- Rendimiento aprox.: 53m²/L (575 ft²/L) por capa
- Número de capas: 1 capa = mate; 2 capas = satinado
- Opciones de color: Transparente
- Temperatura de aplicación: +5°C a 35°C
- Tiempo de secado aprox.: Seca y cura instantáneamente bajo LED-UV de 395nM
- Tamaños disponibles: 750 g, 2.5 kg
- Vida útil: Hasta 6 meses
Este es un producto de uso profesional que no está disponible para compra directa. Los clientes deben presentar prueba de una empresa registrada y poseer un número de empresa válido. Envíe un correo electrónico a info@woodvault.com para obtener más información y comenzar el proceso de calificación comercial.
Instrucciones de aplicación
La cantidad de aplicación para LED Smart Oil es de aprox. 10-15g/m²
Equipo necesario:
- Almohadilla blanca o rodillo
- Lámpara LED-UV Osmo de 395nm
Preparación de la superficie: La superficie de madera debe estar limpia, seca y libre de heladas (contenido de humedad máx. 10 %).
Grano de lijado recomendado para suelos de madera: P100-P120
Grano de lijado recomendado para muebles, puertas, etc.: P120-P180
- Osmo LED Smart Oil está listo para usar. No diluir. Agitar bien.
- Pulir una capa sobre la superficie de la madera con una almohadilla blanca no abrasiva, como Osmo White SuperPad o similar. Aplicar aproximadamente 15-20g/m2 sobre la superficie de la madera y pulir hasta que no queden marcas de remolino circulares en la superficie de la madera.
- Con la lámpara LED-UV Osmo de 395nm o similar, pasar la lámpara de curado sobre el área tratada lentamente a una velocidad de aproximadamente 5 segundos por pie con la lámpara sostenida a una altura de 4-6 pulgadas (10-15cm) por encima de la superficie de la madera.
- Se puede aplicar una segunda capa opcional que aumentará tanto la durabilidad de la superficie como el brillo.
- Después de que la primera capa se haya curado, lijar ligeramente la superficie con papel de lija de grano P320 y eliminar el polvo de lijado con un paño de limpieza.
- Aplicar una segunda capa fina de aproximadamente 5-6g/m2 sobre la superficie de la madera con una almohadilla blanca no abrasiva, como Osmo White SuperPad o similar. Pulir la superficie de la madera hasta que no queden marcas de remolino circulares en la superficie de la madera y luego curar con lámpara LED-UV, como se indica en el paso 3.
Una vez seca, la superficie está lista para su uso regular o empaque sin necesidad de un período de curado adicional.
Almacenamiento: 6 meses si la lata se mantiene seca, bien cerrada y almacenada a temperaturas entre 5 °C y 35 °C. Si se espesa por congelación, almacenar 24-36 horas a temperatura ambiente antes de usar.
- 5 stars: 19 (83%)
- 4 stars: 3 (13%)
- 3 stars: 0 (0%)
- 2 stars: 1 (4%)
- 1 star: 0 (0%)
Definitely a game changer in the woodworking industry. Literally saves me days of dry times. Days saved =$$$ and KJP is my new supplier along with their top tier customer service is my go to for tools/finishing for my furniture/cabinetry needs.
Barry/ontario
Excellent product, the future of finish in woodworking
Fast efficient service
Great products, fast delivery and great service.
The Osmo Polyx-Oil provides a beautiful and durable finish on my projects, and the staff at KJP are always helpful in providing the info I need.
Had to choose between Osmo Smart Oil and Clean Armor UV Resin. Products seemed to give similar finish with quick UV cure. Chose Osmo as Clean Armor almost twice the cost.
KJP contacted to ship to BC as dealer in Kelowna does not carry and dealer in Calgary was out of the 750 ml. KJP shipping was very fair and relatively quick. Very easy to deal with.
Tested the product on a small kitchen table. 80% of the time was prepping with 20% being finishing. 3 coats in one evening was no problem ending with a hard satin/semi gloss finish. UV curing light had been purchased on Aliexpress for $120. They call it a 600 watt but think output is 60 watt and had no problems curing the oil taking my time passing light 4 - 6 inches over surface. Have worked with regular Osmo before and application is much the same with the oil. I do not
find easy as it is relatively thick and requires a bit of effort to get an even 'thin" coat as recommended particularly the first coat as the applicator 'drags& until after the oil is aborbed into the grain. Subsequent costs are easier but still require some effort.
Overall pleased with the result. One concern with Osmo is the shelf life which is reported to be 6 months once opened. I am getting ready to do a larger for table top which should use up the can so shelf life shouldn't be a worry.
I used this on a large coffee table I built. Works great! Table turned out beautiful.
Full discloser, I am the world's worst lacquer and paint finisher. That being said the Osmo UV-Protection Oil is outstanding as far as application goes. Used a micro-fiber roller and foam brush for application and it went on great with minimal runs and zero streaking. As far as wood color integrity it has been excellent. Hard maple did not yellow out like some protectants tend to do and Brazilian walnut had a nice dark natural color to it. Time will tell on durability but 2 coats on an Adirondack chair seems to do the trick. It is expensive but if the chair survives the summer I will be purchasing a gallon next time around.
Some boards are damaged and they refused to change them. So sad and will avoid buying here.
Hi Mark,
In this particular case you were contacted both by Karen and Natalie to sort this matter out. We were still waiting on measurements and answers from you so we could help. Hopefully we can line up on something else in the future.
Thank you
Perfect easy to apply
Osmo 2K Wood Oil
Have used this on a table top before - this time on a bed frame. Easy to work with, relatively short drying time (8-10h to re-coat). Incredibly easy to apply and repair should the need arise. Satin Finish is matt but leaves a nice rich golden tone on maple (I believe the Matt would not change the original colour at all, but have not used this so cannot verify).
Osmo Polyx-Oil
Used it as a top coat for a hallway bench that had some 3/4 inch tiger wood as the seat. Nice product to work with and seems to leave a nice finish on hardwood. I would use it again for sure.
Easy to apply - results in a hard, wonderful finish and brings out the grain and beauty of the wood. A great product that I will recommend. The Polyx oil arrived well packaged and pristine!! Thanks
Will definitely order from here again, it came fast and well packed.
This stuff is pretty great. Dead easy to apply, won’t kill too many brain cells with fumes, and rock hard finish in two days. I’ve only used the clear Matt and gloss, not any of the colours. It’s a very natural finish that highlights natural
Grain and colour. Good stuff.
Love the product! So easy to use and gives a nice sheen. First attemp my cat walked on my project and i fixed it right away. Easy too! So yes! I love it. Deffinately my new go to!
product worked very well. cant wait to use it on my next project. Definitely recommend it
This product is fantastic. It applies easily, dries to a nice smooth finish that is hard, durable and brilliant. Highly recommended
First, I'm really satisfied with the delivery process. I ordered the product on a Wednesday night, and I received it on the Friday morning. I haven't put to test the product that much, but it seems much more efficient as far as making my counter waterproof and stain proof than the regular oil for butcher block I used previously (bamboo countertop). It seems I won't be watching my countertop for stain or marks every 5 seconds, and it seems it's gonna be much easier to clean. So, very happy so far!
Easy to apply and gives a nice finish
I used it on walnut, which I regret. Works great on maple!