Aceite de Madera Osmo 2K
El Aceite para Madera 2K de Osmo es un aceite de dos componentes, sin disolventes y de una sola capa que se cura completamente en un día. Ideal para suelos, escaleras e interiores comerciales de alto tránsito, incluyendo maderas duras aceitosas y resinosas.
375ml: cubre ~15-18.7 m²
1L: cubre ~40-50 m²
Tiempo de secado: 12-24 horas, 1 capa
Disponible
- Description
- Cobertura
- Instrucciones de aplicación
¡24 horas de secado, 10 colores y 1 transparente!
El aceite para madera 2K es el primer aceite de Osmo de una sola capa, sin disolventes y de 2 componentes, basado en aceites naturales. Gracias a la innovadora tecnología de aglutinantes, la superficie certificada de bajas emisiones se cura completamente en solo un día, ahorrando tiempo y dinero. Adecuado para todos los suelos de madera, escaleras y superficies de muebles. Ideal para maderas duras aceitosas y resinosas y para interiores comerciales.
- Aplicación sencilla: Solo se necesita una capa, lo que ahorra tiempo y permite la aplicación en un solo día. Mezcle los dos componentes para usar de inmediato.
- Acabado duradero: Una capa ofrece una resistencia al desgaste y una protección sorprendentes, lo que la hace ideal para áreas de alto tránsito como suelos y escaleras.
- Alta cobertura: Un litro cubre aproximadamente 40-50 m2 (430-538 pies2) por capa.
- Adecuado para interiores comerciales: Debido al corto tiempo de secado, la superficie sin disolventes y de bajo mantenimiento, el aceite para madera 2K es ideal para su uso en escuelas, restaurantes y otros interiores públicos.
- Compatible: Adecuado para casi todas las especies de madera, incluidas las maderas aceitosas y resinosas. Los pequeños daños y arañazos se pueden reparar fácilmente sin transiciones perceptibles.
Cobertura
Cobertura aproximada: 40-50 m²/L (430-538 ft2/L) por capa
Tiempo de secado aproximado: 12-24 horas
Número de capas: 1
1. El aceite para madera Osmo 2K no está listo para usar. Poco antes de la aplicación, mezcle el endurecedor y el aceite (relación de mezcla 1:8% en volumen) asegurándose de que ambos componentes estén completamente combinados. No diluir.
Importante: La vida útil del producto después de la mezcla es de aproximadamente 3-4 horas. El producto mezclado sobrante después de este tiempo caducará y debe desecharse adecuadamente.
2. Con una llana de doble hoja de Osmo, distribuya el aceite para madera 2K sobre la superficie. En
suelos biselados, aplique el aceite para madera 2K en secciones finas con el rodillo de microfibra de Osmo,
sin rellenar las juntas.
3. Espere aproximadamente 20-40 minutos para que el aceite penetre en la madera.
4. Pula el aceite en la madera y nivele la superficie con una máquina monodisco con una almohadilla
blanca. Para muebles, use el aplicador de mano y una almohadilla blanca.
Nota: Si la almohadilla blanca deja rayas debido a la aplicación de demasiado producto, le
recomendamos reemplazar la almohadilla y continuar puliendo con una almohadilla nueva hasta que las rayas
hayan desaparecido.
5. Tiempo de secado aproximado: 12-24 horas (condiciones climáticas normales, 23 °C/50 % de humedad relativa).
Las temperaturas más bajas y/o la mayor humedad pueden afectar el tiempo de secado. Asegúrese de que el espacio esté bien
ventilado.
Para evitar una posible acumulación de presión en el recipiente, permita que las mezclas de aceite y endurecedor
reaccionen completamente antes de cerrar la tapa (aprox. 12-16 horas).
- 5 stars: 19 (83%)
- 4 stars: 3 (13%)
- 3 stars: 0 (0%)
- 2 stars: 1 (4%)
- 1 star: 0 (0%)
Definitely a game changer in the woodworking industry. Literally saves me days of dry times. Days saved =$$$ and KJP is my new supplier along with their top tier customer service is my go to for tools/finishing for my furniture/cabinetry needs.
Barry/ontario
Excellent product, the future of finish in woodworking
Fast efficient service
Great products, fast delivery and great service.
The Osmo Polyx-Oil provides a beautiful and durable finish on my projects, and the staff at KJP are always helpful in providing the info I need.
Had to choose between Osmo Smart Oil and Clean Armor UV Resin. Products seemed to give similar finish with quick UV cure. Chose Osmo as Clean Armor almost twice the cost.
KJP contacted to ship to BC as dealer in Kelowna does not carry and dealer in Calgary was out of the 750 ml. KJP shipping was very fair and relatively quick. Very easy to deal with.
Tested the product on a small kitchen table. 80% of the time was prepping with 20% being finishing. 3 coats in one evening was no problem ending with a hard satin/semi gloss finish. UV curing light had been purchased on Aliexpress for $120. They call it a 600 watt but think output is 60 watt and had no problems curing the oil taking my time passing light 4 - 6 inches over surface. Have worked with regular Osmo before and application is much the same with the oil. I do not
find easy as it is relatively thick and requires a bit of effort to get an even 'thin" coat as recommended particularly the first coat as the applicator 'drags& until after the oil is aborbed into the grain. Subsequent costs are easier but still require some effort.
Overall pleased with the result. One concern with Osmo is the shelf life which is reported to be 6 months once opened. I am getting ready to do a larger for table top which should use up the can so shelf life shouldn't be a worry.
I used this on a large coffee table I built. Works great! Table turned out beautiful.
Full discloser, I am the world's worst lacquer and paint finisher. That being said the Osmo UV-Protection Oil is outstanding as far as application goes. Used a micro-fiber roller and foam brush for application and it went on great with minimal runs and zero streaking. As far as wood color integrity it has been excellent. Hard maple did not yellow out like some protectants tend to do and Brazilian walnut had a nice dark natural color to it. Time will tell on durability but 2 coats on an Adirondack chair seems to do the trick. It is expensive but if the chair survives the summer I will be purchasing a gallon next time around.
Some boards are damaged and they refused to change them. So sad and will avoid buying here.
Hi Mark,
In this particular case you were contacted both by Karen and Natalie to sort this matter out. We were still waiting on measurements and answers from you so we could help. Hopefully we can line up on something else in the future.
Thank you
Perfect easy to apply
Osmo 2K Wood Oil
Have used this on a table top before - this time on a bed frame. Easy to work with, relatively short drying time (8-10h to re-coat). Incredibly easy to apply and repair should the need arise. Satin Finish is matt but leaves a nice rich golden tone on maple (I believe the Matt would not change the original colour at all, but have not used this so cannot verify).
Osmo Polyx-Oil
Used it as a top coat for a hallway bench that had some 3/4 inch tiger wood as the seat. Nice product to work with and seems to leave a nice finish on hardwood. I would use it again for sure.
Easy to apply - results in a hard, wonderful finish and brings out the grain and beauty of the wood. A great product that I will recommend. The Polyx oil arrived well packaged and pristine!! Thanks
Will definitely order from here again, it came fast and well packed.
This stuff is pretty great. Dead easy to apply, won’t kill too many brain cells with fumes, and rock hard finish in two days. I’ve only used the clear Matt and gloss, not any of the colours. It’s a very natural finish that highlights natural
Grain and colour. Good stuff.
Love the product! So easy to use and gives a nice sheen. First attemp my cat walked on my project and i fixed it right away. Easy too! So yes! I love it. Deffinately my new go to!
product worked very well. cant wait to use it on my next project. Definitely recommend it
This product is fantastic. It applies easily, dries to a nice smooth finish that is hard, durable and brilliant. Highly recommended
First, I'm really satisfied with the delivery process. I ordered the product on a Wednesday night, and I received it on the Friday morning. I haven't put to test the product that much, but it seems much more efficient as far as making my counter waterproof and stain proof than the regular oil for butcher block I used previously (bamboo countertop). It seems I won't be watching my countertop for stain or marks every 5 seconds, and it seems it's gonna be much easier to clean. So, very happy so far!
Easy to apply and gives a nice finish
I used it on walnut, which I regret. Works great on maple!