Amana - 51454-Z - Corte de aluminio de 1/8"
Disponible
- Description
- Excelente para cortar
- Recubrimiento de nitruro de circonio (ZrN)
- Beneficios del acabado de espejo
- Velocidad y tasa de alimentación
51454-Z - Corte de Aluminio (Carburo Sólido, Flauta Espiral 'O', Corte Ascendente)
- Vástago: 1/4"
- Diámetro: 1/8"
- Longitud de corte: 1/2"
- Longitud total: 2"
- Flautas: 1 flauta de corte ascendente
Para usar solo en máquinas CNC y fresadoras con alimentación automática.
Utilizando carburo de submicrongrano de la más alta calidad, estas brocas tienen un sistema especial de procesamiento de bordes patentado que presenta un filo de corte súper pulido con un "acabado de espejo" único, lo que resulta en cortes limpios, menor probabilidad de que las virutas se vuelvan a soldar, un acabado de superficie superior y una vida útil más larga de la herramienta. Hélice a la derecha, corte a la derecha.
Diseñado específicamente para una variedad de aplicaciones de mecanizado CNC, excelente para cortar.
RPM máximas: 35,000
- Material compuesto de cobre (CCM) ALPOLIC®
- Alucobond®
- Aluminio
- Aluminio 5052
- Aluminio 6061
- Aleaciones de aluminio
- Materiales compuestos de aluminio (ACM)
- Panel compuesto de aluminio (ACP)*
- Alupanel®
- Latón
- Cobre
- Dibond®
- Durabond**
- e-panel™
- Etalbond®
- Fomex® con cara de aluminio
- Oro
- Metales no ferrosos
- Plástico
- Plata
- Superficie sólida
- Material compuesto de titanio (TCM)
- Madera
Ideales para aplicaciones industriales, nuestras brocas de enrutador de flauta espiral 'O' se fabrican utilizando técnicas y materiales innovadores que producen resultados superiores con cada corte y ayudan a que los proyectos de aluminio requieran menos mano de obra.
Reductor de pinza de fresadora RB-102 (1/4 a 1/8) disponible para brocas de vástago de 1/8.
- Crea un filo de corte más duro y resistente, lo que permite una vida útil prolongada del filo de corte y ayuda a prevenir la acumulación de material en las flautas durante el corte.
- Tienden a funcionar/girar mucho más rápido que una herramienta sin recubrimiento.
- La geometría de la flauta optimizada y la baja desviación total indicada (TIR) garantizan cortes limpios, eliminan esencialmente el lijado y reducen el traqueteo (donde la máquina o la pieza de trabajo vibran) bajo cargas de viruta altas (cuando se usa con husillos de baja TIR).
- El alto volumen de la flauta soporta altas velocidades de avance y cargas de viruta.
- Relación de aspecto alta para corte de alcance profundo de una sola pasada.
- Geometría de la flauta optimizada para cortar espuma para letreros, tableros para letreros, maderas duras, termoplásticos y compuestos fenólicos.
Advertencia: Nunca intente cortar metales ferrosos con estas brocas.
Inspeccione la calidad del corte y ajuste la alimentación/velocidad en consecuencia.
Para obtener resultados óptimos y una vida útil prolongada de la herramienta, utilice un sistema de lubricación por niebla o refrigeración por aire.- Filo de corte afilado como una navaja
- Eliminación de virutas sin esfuerzo
- Ayuda a prevenir la resoldadura de virutas
- Prolonga la vida útil de la herramienta
- Calidad de corte excepcional
- Disipa bien el calor y previene la fusión
Parámetros de funcionamiento CNC basados en 1 x profundidad de diámetro por pasada:
- RPM: 18,000
- Velocidad de avance: 60 IPM
- Carga de viruta por diente: 0.004"
- Velocidad de rampa descendente: 60 IPM
- 5 stars: 14 (88%)
- 4 stars: 2 (13%)
- 3 stars: 0 (0%)
- 2 stars: 0 (0%)
- 1 star: 0 (0%)
Had an issue with one of the two I purchased. Contacted Amana who told me to get a RMA from KJP. My initial contact was ignored (no response then a confirmation I was being ignored when someone accidentally replied all instead of sending a bcc) Then I was offered the opportunity to return the bit via post at my expense (don't live in Ottawa no mo') provided it had not been used. In my original email I said I got home and used it. The issue was it marred the work and the only way one could see that is if ya used the bit.
Turns out there was a problem the bit was defective and Amana took care of me without any assistance from KJP.
Was a gross interaction and I don't know why Andrew was such a meanie Richard head from the jump.
Really good bit. The pilot drill broke pretty early on. Seems to be a somewhat common issue. So I happened to be back in Ottawa and decided to pop in to KJP. Ran in to Andrew, who had no idea who I was, and asked about buying a replacement pilot drill. He was rude af and told me they don't stock the drill but I could go online and order it tho...
That was very helpful because I wasn't aware you can buy stuff on the internet.
Came in on time and in great condition
Excellent bit with Spectra finish, very clean cutting leaving very clean top and bottom edges on Baltic Birch plywood
Look good. Haven't used them yet. Looking forward to it.
Chews through wood and leaves a very smooth surface. And it's a good price!
I bought this to use with the Shaper Origin Pro for some engraving. It does a nice job.
Great blade. Best bang for your buck!
Great blade, rips thru like butter!
Long lasting and accurate👍
Excellent quality blade!
Does a good job, but since I am working with a very hard wood, (acacia), i had to have it sharpened halfway through the job.
KJP rocked my order. They gave me a quote super fast to custom size a small piece of curly hard maple. I ordered the board and an Amana 1 1/8" bit for surfacing. The Amana bit works fast and cuts clean. The bit cost at KJP is very economical compared to other suppliers. My two piece order came very fast.
Nice Work KJP and thanks Peter.
Cheers
Chris
Quality bits make all the difference in CNC. Amana bits are fantastic.
Glad to see that I can get them from a Canadian supplier at good prices!
Also, they didn't have this one in their selection, but they ordered it in and put it on their website!
Customer service was amazing!
Thank you!
Gets in tight for those small details! Happy I ordered 2 because this is my go to for 3D carving!
Great product, easy ordering, fast delivery! Thanks KJP!
Easy to order, fast delivery and excellent quality! Thanks so much KJP!