Amana - 46094-K - Espiral de composite de 1/4"
La fresa espiral compuesta Amana 46094-K de 1/4" es una fresa de carburo sólido para routers CNC, diseñada para el acabado de materiales compuestos y aeroespaciales modernos.
Vástago:1/4"
Diámetro de corte:1/4"
Longitud de corte:3/4"
Longitud total:2-1/2"
Estrías:2 estrías de corte ascendente
Agotado
- Description
- Excelente para cortar
- Recubrimiento
- Velocidad y Tasa de Avance
46094-K - Espiral para Material Compuesto (Carburo Sólido, 3 Estrías, Corte Hacia Arriba)
- Vástago: 1/4"
- Diámetro: 1/4"
- Longitud de corte: 3/4"
- Longitud total: 2-1/2"
- Estrías: 2 Estrías con Corte hacia Arriba
La Geometría de Acabado de Materiales Modernos (MMFG) de Amana Tool® incorpora múltiples estrías de alto cizallamiento y un recubrimiento Spektra™ diseñado para la combinación definitiva de acabado y longevidad de la herramienta en materiales aeroespaciales. Los materiales modernos presentan desafíos para el fabricante que utiliza estas herramientas especiales de múltiples estrías con recubrimiento Spektra™ que abordan estos desafíos con una combinación de geometría ganadora.
- Plástico
- Piedra acrílica
- Aluminio
- Acrilonitrilo-Butadieno-Estireno (ABS)
- Polímero reforzado con fibra de carbono (CFRP)
- Compuesto
- Corian
- Coroplast®*
- Fibra de vidrio
- Placa de circuito impreso de fibra de vidrio
- HDPE
- Poliestireno de alto impacto (HIPS)
- Polietileno de baja densidad (LDPE)
- Fenólicos
- Poli (metacrilato de metilo) (PMMA)
- Policarbonato (Lexan™)†
- Tereftalato de Polietileno Glicol Modificado (PETG / PET-G)
- Poliolefina Termoplástica (TPO)
*Un cartón de plástico blando fabricado con PVC súper blando y súper flexible.
†Recomendación: Utilice las velocidades de avance más lentas sugeridas y las brocas más cortas necesarias para cortar y enrutar Lexan™.
Las brocas Spektra™ cuentan con un recubrimiento nanocompuesto nACo® con una nanodureza extrema y resistencia al calor. Con un brillante y distintivo color, nACo proporciona mejoras adicionales en cuatro aspectos críticos de las herramientas de router.
- El recubrimiento nACo es un recubrimiento cerámico microdelgado que permite que el filo de la herramienta conserve una nitidez y lubricidad cruciales. Esto proporciona longevidad y produce resultados de corte de la más alta calidad.
- El recubrimiento previene el calor elevado y la oxidación, lo que es perjudicial para el rendimiento de la herramienta de corte.
- Los tonos multicolor, aunque atractivos, se disiparán con el uso y, sin embargo, el recubrimiento seguirá siendo totalmente eficaz.
- nACo ofrece aproximadamente 4.500 Vickers para una impresionante dureza sólida en las áreas de corte de la herramienta, para un aumento de hasta 2.5 veces en comparación con las brocas sin recubrimiento.
Nota: El color base azul se disipa inmediatamente con el uso. El recubrimiento nanocompuesto nACo® no se desgastará.
Parámetros de funcionamiento CNC basados en una profundidad de pasada de 1 x diámetro:
- RPM: 18,000
- Velocidad de avance: 100 IPM
- Carga de viruta por diente: 0.002"
- Tasa de rampa descendente: 34 IPM
- 5 stars: 14 (88%)
- 4 stars: 2 (13%)
- 3 stars: 0 (0%)
- 2 stars: 0 (0%)
- 1 star: 0 (0%)
Had an issue with one of the two I purchased. Contacted Amana who told me to get a RMA from KJP. My initial contact was ignored (no response then a confirmation I was being ignored when someone accidentally replied all instead of sending a bcc) Then I was offered the opportunity to return the bit via post at my expense (don't live in Ottawa no mo') provided it had not been used. In my original email I said I got home and used it. The issue was it marred the work and the only way one could see that is if ya used the bit.
Turns out there was a problem the bit was defective and Amana took care of me without any assistance from KJP.
Was a gross interaction and I don't know why Andrew was such a meanie Richard head from the jump.
Really good bit. The pilot drill broke pretty early on. Seems to be a somewhat common issue. So I happened to be back in Ottawa and decided to pop in to KJP. Ran in to Andrew, who had no idea who I was, and asked about buying a replacement pilot drill. He was rude af and told me they don't stock the drill but I could go online and order it tho...
That was very helpful because I wasn't aware you can buy stuff on the internet.
Came in on time and in great condition
Excellent bit with Spectra finish, very clean cutting leaving very clean top and bottom edges on Baltic Birch plywood
Look good. Haven't used them yet. Looking forward to it.
Chews through wood and leaves a very smooth surface. And it's a good price!
I bought this to use with the Shaper Origin Pro for some engraving. It does a nice job.
Great blade. Best bang for your buck!
Great blade, rips thru like butter!
Long lasting and accurate👍
Excellent quality blade!
Does a good job, but since I am working with a very hard wood, (acacia), i had to have it sharpened halfway through the job.
KJP rocked my order. They gave me a quote super fast to custom size a small piece of curly hard maple. I ordered the board and an Amana 1 1/8" bit for surfacing. The Amana bit works fast and cuts clean. The bit cost at KJP is very economical compared to other suppliers. My two piece order came very fast.
Nice Work KJP and thanks Peter.
Cheers
Chris
Quality bits make all the difference in CNC. Amana bits are fantastic.
Glad to see that I can get them from a Canadian supplier at good prices!
Also, they didn't have this one in their selection, but they ordered it in and put it on their website!
Customer service was amazing!
Thank you!
Gets in tight for those small details! Happy I ordered 2 because this is my go to for 3D carving!
Great product, easy ordering, fast delivery! Thanks KJP!
Easy to order, fast delivery and excellent quality! Thanks so much KJP!